jsp09
Jan 3, 12:54 PM
http://www.limera1n.com/
camomac
Jan 21, 02:54 PM
Yes there is, and this is how.
1) Add layer in Photoshop
2) Drop a black paint bucket
3) Merge Down
4) Save as..
This method also works well with white.
1) Add layer in Photoshop
2) Drop a black paint bucket
3) Merge Down
4) Save as..
This method also works well with white.
Cimrie
Mar 7, 05:02 PM
ETA, thats great. How exactly do you have it setup?
IMO Using the aggregate soundcard function is not a permanent solution.
Its much better to have the all the audio coming in/out of one device.
You will get much greater sound quality,reliability and less latency using one device.
This will be very important if you want to/end up djing outside your own home.
http://www.dv247.com/computer-hardware/focusrite-saffire-6-usb--67804
http://www.dv247.com/computer-hardware/tc-electronic-desktop-konnekt-6-firewire-audio-interface-and-monitor-control--48578
^^ I do realise �150+ is alot to spend initially but in the long run you will see the benefits outweigh the cost.
The phrase "buy cheap buy twice" is worth thinking about.
Couldn't agree more. Yes this setup is very much temporary to see if DJ'ing is for me then I can slowly expand my gear (first step decent multi channel soundcard hha)
Set up is very dodgy...Speakers to Cheapy USB soundcard to USB expander to mac, headphones to mac, and their USB power supply to USB port expander (along with the USB for deck, lol)
IMO Using the aggregate soundcard function is not a permanent solution.
Its much better to have the all the audio coming in/out of one device.
You will get much greater sound quality,reliability and less latency using one device.
This will be very important if you want to/end up djing outside your own home.
http://www.dv247.com/computer-hardware/focusrite-saffire-6-usb--67804
http://www.dv247.com/computer-hardware/tc-electronic-desktop-konnekt-6-firewire-audio-interface-and-monitor-control--48578
^^ I do realise �150+ is alot to spend initially but in the long run you will see the benefits outweigh the cost.
The phrase "buy cheap buy twice" is worth thinking about.
Couldn't agree more. Yes this setup is very much temporary to see if DJ'ing is for me then I can slowly expand my gear (first step decent multi channel soundcard hha)
Set up is very dodgy...Speakers to Cheapy USB soundcard to USB expander to mac, headphones to mac, and their USB power supply to USB port expander (along with the USB for deck, lol)
charlyee
Mar 27, 10:20 PM
Thanks very much, I would like to store the videos externally instead of leaving them on the MBA but not lose the HD. Sounds like the Superdrive is out, so if I store it on an external hard drive, will it maintain HD at 1080 or even 720 when playing back from it on my MBA or TV?
Hope I made sense
Thanks much.:)
Hope I made sense
Thanks much.:)
savar
Nov 25, 11:46 PM
Is anyone on AIM now that can show me how to make a my SQL database on my server?
My AIM is "Glenn A Wolsey"
Without quotes
wowww, thats a very broad request. have you installed the software yet? what os? the easiest way to administrate a mysql database -- especially for a beginner -- is to download a mysql admin gui...i cant name one for os x, but you could try phpMyAdmin if you're running a web server on the same machine. otherwise check out version tracker.
My AIM is "Glenn A Wolsey"
Without quotes
wowww, thats a very broad request. have you installed the software yet? what os? the easiest way to administrate a mysql database -- especially for a beginner -- is to download a mysql admin gui...i cant name one for os x, but you could try phpMyAdmin if you're running a web server on the same machine. otherwise check out version tracker.
liamkp
Jul 6, 07:55 PM
There is gonna be a 4g? Are you kidding? I just bought my 3g like a week ago.
Most likely, where have you been. See my sig.
That sucks.
Most likely, where have you been. See my sig.
That sucks.
Hackint0sh814
May 5, 06:52 PM
I don't think so, but glad you found your way.
acedickson
Mar 11, 06:39 PM
I've been trying to do use several shortcuts with the "fat" arrowkeys but I don't have a "fat" arrowkey on my keyboard. Does it mean something else or am I just slow?
leomac08
Apr 4, 01:03 AM
I got 2 of the 16gb ones.
You got 2? wow.:p I thought they would would limit people to one since they would only sell 15.
You got 2? wow.:p I thought they would would limit people to one since they would only sell 15.
Rower_CPU
Jul 3, 04:23 PM
Any number of PC hardware sites regularly review LCDs. Try Anandtech (http://www.anandtech.com) and Tom's Hardware Review (http://www.tomshardware.com).
gwuMACaddict
Dec 20, 11:50 AM
wow... nuts...
AhmedFaisal
Apr 8, 05:58 PM
I hope that one day we actually do evolve as a species into something more enlightened rather than remaining the tool-wielding moronic savages that we are and have been since we split off from the rest of the apes.
ksiedzulek
Apr 22, 09:50 AM
thanks for quick, great reply Guys!
but...
Your problem has nothing to do with selectors at all.
I've thought that the reason why breakpoints point 4 times at count++ is because of selector:
-(void) sortedList
{
//int count=0;
[bookArray sortUsingSelector:@selector(compareName:)];
}
-(NSComparisonResult) compareName: (id) element
{
count++;
NSLog(@" ");
NSLog(@"the count number: %d", count);
NSLog(@"-------------------------");
NSLog(@"what is here?:%@", [element name]);
NSLog(@"and here: %@",[self name]);
NSLog(@"+++++++++++++++++++++++++");
NSLog(@" ");
return [name compare:(id) [element name]];
}
I put breakpoints because I wonder what happen with this code during debugging. Now I know that code go 4 times through "-(NSComparisonResult) compareName: (id) element", but I still don't know why my program know that he must make a "loop"? and if I call these method:
[bookArray sortUsingSelector:@selector(compareName: )]
program knows what put as a argument here:
-(NSComparisonResult) compareName: (id) element
..and he knows that (for my array) for 4 times..
..why? because of @selector?
but...
Your problem has nothing to do with selectors at all.
I've thought that the reason why breakpoints point 4 times at count++ is because of selector:
-(void) sortedList
{
//int count=0;
[bookArray sortUsingSelector:@selector(compareName:)];
}
-(NSComparisonResult) compareName: (id) element
{
count++;
NSLog(@" ");
NSLog(@"the count number: %d", count);
NSLog(@"-------------------------");
NSLog(@"what is here?:%@", [element name]);
NSLog(@"and here: %@",[self name]);
NSLog(@"+++++++++++++++++++++++++");
NSLog(@" ");
return [name compare:(id) [element name]];
}
I put breakpoints because I wonder what happen with this code during debugging. Now I know that code go 4 times through "-(NSComparisonResult) compareName: (id) element", but I still don't know why my program know that he must make a "loop"? and if I call these method:
[bookArray sortUsingSelector:@selector(compareName: )]
program knows what put as a argument here:
-(NSComparisonResult) compareName: (id) element
..and he knows that (for my array) for 4 times..
..why? because of @selector?
thechidz
Jan 31, 08:49 PM
Dang!!!! awesome deal!
mc68k
May 28, 01:10 PM
For those of you using the SMP client, are you finding that you have to run pretty much 24/7 in order to make the work unit deadlines?the biggest factor is your clock speed for shaving off time on each step of the WU. if you are not doing CPU intensive tasks the time for each step should remain pretty constant. say each step requires an average of 16 minutes you could multiply that by 100 for the steps and get 1600 minutes. thats 26 hours if running 24/7. the deadline is like 3 or 4 days so you could take some breaks in between there and get it done. say each step is 20 minutes then your looking at 33 hours etc
so yeah if you take small breaks no prob, but if you leave it off for a day or more you may be cutting it close.
so yeah if you take small breaks no prob, but if you leave it off for a day or more you may be cutting it close.
dgitalman
Oct 20, 06:45 AM
This guide shows you how to rip DVD to MP4, AVI, MP3, WMV, WMA, FLV, MKV, MPG, RM, 3GP, etc by using ********* DVD Ripper (http://www.*********.com/dvd-ripper.html)
Step 1: Install and run ********* DVD Ripper (http://www.*********.com/downloads/dvd-ripper.exe)
Step 2: Import DVD.
Place the DVD into your DVD drive and click the �Load DVD� button to load DVD.
http://www.*********.com/images/guide/loaddvd.jpg
Tips: This DVD Ripper can load three DVD source, you can load your DVD from DVD drive, DVD folder in your PC and also IFO file.
Step 3: Video settings.
Select the output video format you want from the �Profile� drop-down list.
http://www.*********.com/images/guide/videoformats.jpg
Tips:
1: You can also select Audio Track and Subtitle from their respectively drop-down list.
2: You can click the �Settings� button to set your video parameters.
http://www.*********.com/images/guide/settings.jpg
In the Video Settings, you can select Encoder, Frame Rate, Resolution and Bitrate for your movie
In the Audio Settings, you can select Encoder, Channels, Bitrate and Sample Rate for your movie.
when you choose the specific settings, the lower window will show the "help" to explain the meanings of each setting.
Step 4: Start conversion
Click the �Start� button to start your conversion and in a short while it will be finished.
Step 5: Click �Open� button to open your output destination file.
More tips:
1: Trim Movie
If you just want to convert a clip from your DVD movie, you can click the �Trim� button to open the Trim dialog, you can trim a duration of the selected title or chapter by either dragging the Start Time and End Time sliders or setting the time parameters in each corresponding field.
After you set the trimming time, the length of the captured clip will be shown in the Select Length box for your reference.
http://www.*********.com/images/guide/trim.jpg
2. Movie Effect
If you want to change the original video effect, you can click the Effect icon to set the video brightness, contrast, saturation, etc. You can also set the special effect for your movie to cater to your need.
http://www.*********.com/images/guide/effect.jpg
Step 1: Install and run ********* DVD Ripper (http://www.*********.com/downloads/dvd-ripper.exe)
Step 2: Import DVD.
Place the DVD into your DVD drive and click the �Load DVD� button to load DVD.
http://www.*********.com/images/guide/loaddvd.jpg
Tips: This DVD Ripper can load three DVD source, you can load your DVD from DVD drive, DVD folder in your PC and also IFO file.
Step 3: Video settings.
Select the output video format you want from the �Profile� drop-down list.
http://www.*********.com/images/guide/videoformats.jpg
Tips:
1: You can also select Audio Track and Subtitle from their respectively drop-down list.
2: You can click the �Settings� button to set your video parameters.
http://www.*********.com/images/guide/settings.jpg
In the Video Settings, you can select Encoder, Frame Rate, Resolution and Bitrate for your movie
In the Audio Settings, you can select Encoder, Channels, Bitrate and Sample Rate for your movie.
when you choose the specific settings, the lower window will show the "help" to explain the meanings of each setting.
Step 4: Start conversion
Click the �Start� button to start your conversion and in a short while it will be finished.
Step 5: Click �Open� button to open your output destination file.
More tips:
1: Trim Movie
If you just want to convert a clip from your DVD movie, you can click the �Trim� button to open the Trim dialog, you can trim a duration of the selected title or chapter by either dragging the Start Time and End Time sliders or setting the time parameters in each corresponding field.
After you set the trimming time, the length of the captured clip will be shown in the Select Length box for your reference.
http://www.*********.com/images/guide/trim.jpg
2. Movie Effect
If you want to change the original video effect, you can click the Effect icon to set the video brightness, contrast, saturation, etc. You can also set the special effect for your movie to cater to your need.
http://www.*********.com/images/guide/effect.jpg
allupons
May 4, 09:33 PM
FYI, this is on the 2011 15" mbp. I am posting it here though as I find the mac pro forum to have the most informed posters of all the forums I frequent. Thanks!
bobfitz14
Mar 13, 07:23 PM
To be fair (not that I am disagreeing with you), the truck driver might not have been fully aware of what happened, since it was happening behind him at freeway speed (60 mph is 88 feet per second, so things behind you recede rather quickly). We do not know how close the vehicles came to each other or whether their was even contact. If he was a (lamentably) inattentive driver, he might not have realized that he was involved. In fact, if, as rdowns said (some witnesses said the bus was speeding) has anything to it, "cut off" might have been due to the truck driver misjudging how fast the bus was going. We can string him up, yes, but only after all the facts are in.
i agree with pretty much everything you said. i know we need facts before we can judge. i was just making broad assumptions but if the truck driver wasn't the cause then you obviously shouldn't hold him at fault.
Apparently evidence is pointing to the bus NOT being clipped by the truck ... and conflicting eyewitness accounts to what the bus driver is saying.
Looking more like the Bus Driver may be at fault ...
http://www.nypost.com/p/news/local/bronx/bus_crash_Dbd7avXLwP7H9x6Wf7pGpL
:rolleyes:
i agree with pretty much everything you said. i know we need facts before we can judge. i was just making broad assumptions but if the truck driver wasn't the cause then you obviously shouldn't hold him at fault.
Apparently evidence is pointing to the bus NOT being clipped by the truck ... and conflicting eyewitness accounts to what the bus driver is saying.
Looking more like the Bus Driver may be at fault ...
http://www.nypost.com/p/news/local/bronx/bus_crash_Dbd7avXLwP7H9x6Wf7pGpL
:rolleyes:
2ndname
Apr 10, 10:27 PM
Yes. All the hot girls that will swarm you, lol, I kid I kid.
I truly think you're just unlucky with the failure on your Logic board. I had a Powerbook G4 for 5 years and it never failed me. It was my college sidekick and I took it everywhere. For every story of a person with a failed Apple product I am sure that there are 100s of success story such as mine. Then again I have not had any HP/Toshiba/Sony product failed on me. I say go for the 2011 MBP and don't worry about all of the ifs.
I truly think you're just unlucky with the failure on your Logic board. I had a Powerbook G4 for 5 years and it never failed me. It was my college sidekick and I took it everywhere. For every story of a person with a failed Apple product I am sure that there are 100s of success story such as mine. Then again I have not had any HP/Toshiba/Sony product failed on me. I say go for the 2011 MBP and don't worry about all of the ifs.
Krizoitz
Mar 15, 02:51 AM
ain't that big of a deal. they're free if you pay.
free if you pay....
free if you pay....
vincenz
Mar 18, 01:21 PM
My 4th gen white "classic" is still going strong too. I hope they never do away with the design-- it's so iconic.
the-wanderer
May 5, 03:34 PM
All,
My dev box is macbook pro with latest OSX, dual boot to Win7 Ult 64.
I setup apache,perl,SSL, php,sql in Win with no problems and website is on the NTFS partition.
on OSX side, apache runs and I have the DocumentRoot to pointed to
/Volumes/Mac_Daddy/docs/web_curr/public_html
NTFS-3G runs fine, I can read/write to win partition but apache is still looking for the doc in Site folder??? WTF???
also I have named the
ServerName localhost
so in any browser if I type in http://localhost the site on the NTFS should be pointed to and loaded but it doesn't work.
and apache thinks the address is 192.xxxx/~user WTF is going on???
do i need to set a hard link in the user's site?? force 127.0.0.1 in the hosts file??
any help kindly appreciated.
My dev box is macbook pro with latest OSX, dual boot to Win7 Ult 64.
I setup apache,perl,SSL, php,sql in Win with no problems and website is on the NTFS partition.
on OSX side, apache runs and I have the DocumentRoot to pointed to
/Volumes/Mac_Daddy/docs/web_curr/public_html
NTFS-3G runs fine, I can read/write to win partition but apache is still looking for the doc in Site folder??? WTF???
also I have named the
ServerName localhost
so in any browser if I type in http://localhost the site on the NTFS should be pointed to and loaded but it doesn't work.
and apache thinks the address is 192.xxxx/~user WTF is going on???
do i need to set a hard link in the user's site?? force 127.0.0.1 in the hosts file??
any help kindly appreciated.
nobunaga209
Jul 12, 03:06 PM
Was this on Nintendo? Sounds like Gradius or Lifeforce.
macktheknife
Oct 17, 07:27 PM
Hey vollspacken,
If you're a student, have you checked out Apple's educational discounts? I think they were selling the 667 and 800 Mhz models for about $1,900 and $2,400, respectively. I paid about $2,600 back in January for a 550 Mhz. :(
If you're a student, have you checked out Apple's educational discounts? I think they were selling the 667 and 800 Mhz models for about $1,900 and $2,400, respectively. I paid about $2,600 back in January for a 550 Mhz. :(
No comments:
Post a Comment